Файл:Planar core assembly exploded.png
![Файл:Planar core assembly exploded.png](http://upload.wikimedia.org/wikipedia/commons/thumb/5/59/Planar_core_assembly_exploded.png/800px-Planar_core_assembly_exploded.png)
Повна роздільність (1280 × 960 пікселів, розмір файлу: 154 КБ, MIME-тип: image/png)
![]() |
Відомості про цей файл містяться на Вікісховищі — централізованому сховищі вільних файлів мультимедіа для використання у проектах Фонду Вікімедіа. |
![]() |
Ця технічна ілюстрація має бути конвертована у векторний формат SVG. Це дає декілька переваг, докладніше про які Ви можете прочитати на сторінці Commons:Media for cleanup. Якщо Вам вже зараз доступна векторна версія даного зображення, завантажте її, будь ласка. Після завантаження замініть цей шаблон на такий: {{vector version available|Назва_завантаженого_файлу.svg}}.
|
Опис файлу
ОписPlanar core assembly exploded.png | Exploded view of an planar inductor constituted by a spiral track on a printed circuit board and a planar magnetic core |
Час створення | |
Джерело | Власна робота |
Автор | Cyril BUTTAY |
Ліцензія (Повторне використання цього файлу) |
as licensed |
Інші версії | Image:Planar core assembly.png |
![]() |
Це зображення було оцінене з використанням настанови про якісні зображення та вважається якісним зображенням.
العربية ∙ جازايرية ∙ беларуская ∙ беларуская (тарашкевіца) ∙ български ∙ বাংলা ∙ català ∙ čeština ∙ Cymraeg ∙ Deutsch ∙ Schweizer Hochdeutsch ∙ Zazaki ∙ Ελληνικά ∙ English ∙ Esperanto ∙ español ∙ eesti ∙ euskara ∙ فارسی ∙ suomi ∙ français ∙ galego ∙ עברית ∙ हिन्दी ∙ hrvatski ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ Jawa ∙ ქართული ∙ 한국어 ∙ kurdî ∙ Lëtzebuergesch ∙ lietuvių ∙ македонски ∙ മലയാളം ∙ मराठी ∙ Bahasa Melayu ∙ Nederlands ∙ Norfuk / Pitkern ∙ polski ∙ português ∙ português do Brasil ∙ rumantsch ∙ română ∙ русский ∙ sicilianu ∙ slovenčina ∙ slovenščina ∙ shqip ∙ српски / srpski ∙ svenska ∙ தமிழ் ∙ తెలుగు ∙ ไทย ∙ Tagalog ∙ Türkçe ∙ toki pona ∙ українська ∙ vèneto ∙ Tiếng Việt ∙ 中文 ∙ 中文(简体) ∙ 中文(繁體) ∙ +/− |
Ліцензування
![]() |
Дозволяється копіювати, розповсюджувати та/або модифікувати цей документ на умовах ліцензії GNU FDL версії 1.2 або більш пізньої, виданої Фондом вільного програмного забезпечення, без незмінних розділів, без текстів, які розміщені на першій та останній обкладинці. Копія ліцензії знаходиться у розділі GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue |
![]() ![]() ![]() |
Цей файл ліцензований на умовах ліцензії Creative Commons Attribution-Share Alike 3.0 Unported | |
| ||
Цей шаблон ліцензування був доданий до файлу в рамках оновлення ліцензії GFDL.http://creativecommons.org/licenses/by-sa/3.0/CC BY-SA 3.0Creative Commons Attribution-Share Alike 3.0truetrue |
![w:uk:Creative Commons](https://upload.wikimedia.org/wikipedia/commons/thumb/7/79/CC_some_rights_reserved.svg/90px-CC_some_rights_reserved.svg.png)
![зазначення авторства](https://upload.wikimedia.org/wikipedia/commons/thumb/1/11/Cc-by_new_white.svg/24px-Cc-by_new_white.svg.png)
![поширення на тих же умовах](https://upload.wikimedia.org/wikipedia/commons/thumb/d/df/Cc-sa_white.svg/24px-Cc-sa_white.svg.png)
- Ви можете вільно:
- ділитися – копіювати, поширювати і передавати твір
- модифікувати – переробляти твір
- При дотриманні таких умов:
- зазначення авторства – Ви повинні вказати авторство, надати посилання на ліцензію і вказати, чи якісь зміни було внесено до оригінального твору. Ви можете зробити це в будь-який розсудливий спосіб, але так, щоб він жодним чином не натякав на те, наче ліцензіар підтримує Вас чи Ваш спосіб використання твору.
- поширення на тих же умовах – Якщо ви змінюєте, перетворюєте або створюєте іншу похідну роботу на основі цього твору, ви можете поширювати отриманий у результаті твір тільки на умовах такої ж або сумісної ліцензії.
Made using povray 3.6 and the following code:
#declare RAD = on; // use radiosity? #declare Exploded=on; // exploded view or not? #declare CoilLength = 2.6; #include "functions.inc" #include "metals.inc" #include "colors.inc" global_settings { #if(RAD) radiosity { brightness 0.60 count 100 error_bound 0.2 gray_threshold 0.0 low_error_factor 0.2 minimum_reuse 0.015 nearest_count 10 recursion_limit 1 #if (version>3.1) adc_bailout 0.01 max_sample -1.0 media off normal off always_sample 1 pretrace_start 0.08 pretrace_end 0.01 #end } #end } background { color White } // declarations for the E magnetic core------------------------------------------------ #declare corner = intersection { // a quarter of cyclindic volume used to "round" the corners lathe { linear_spline 6 <0,0>,<0.05,0>, <0.1,0.05>, <0.1,2.95>,<0.05,3>, <0,3> rotate 90*x } box {<-10,-10,-10>,<10,0,10>} } #declare side = prism { // the extrusions of the volume linear_sweep linear_spline 0, 1, 9, <0.05,0>, <0,0.05>, <0,2.95>, <0.05,3>, <0.25,3>, <0.3,2.95>, <0.3,0.05>, <0.25,0>, <0.05,0> } #declare middle = prism { // the extrusion of the middle leg linear_sweep linear_spline 0, 1, 9, <0.05,0>, <0,0.05>, <0,2.95>, <0.05,3>, <0.95,3>, <1,2.95>, <1,0.05>, <0.95,0>, <0.05,0> } #declare Ecore = difference { union { object {side scale <1,3.4,1> rotate -90*z translate <-1.7,0.2,0> } object {side scale <1,0.5,1> translate -1.8*x } object {middle scale 0.5*y translate -.5*x } object {side scale <1,0.5,1> translate 1.5*x } object {corner translate -1.7*x} object {corner translate 1.7*x} } union { // the notches where the clips sit box {<-10,-10,1.2>,<-1.5,0,1.8>} box {<10,-10,1.2>,<1.5,0,1.8>} } pigment {Gray50} } // declarations for the I magnetic core------------------------------------------------ #declare Icore = difference { union { object {side scale <1,3.4,1> rotate -90*z translate <-1.7,0.2,0> } object {side scale <1,0.2,1> translate -1.8*x } object {middle scale 0.2*y translate -.5*x } object {side scale <1,0.2,1> translate 1.5*x } object {corner translate -1.7*x} object {corner translate 1.7*x} } union { // the notches where the clips sit box {<-10,-10,1.2>,<-1.5,0,1.8>} box {<10,-10,1.2>,<1.5,0,1.8>} } pigment {Gray50} } //declaration of the coil element----------------------- #declare coil = union { union { #declare NbTurns = 8; #declare Pitch =0.08; // the distance between two loops #declare Xstart =0.6; // the spiral rolls around the origin #declare Zstart =2; #declare InitCorner =0.4; // initial length of the 45degree filet #declare Index=0; #declare Width=0.05; #declare DeltaL=Pitch*tan(radians(22.5)); //variation in lenght of the track on each turn #while(Index <= NbTurns) #declare Lengthcorner=InitCorner+2*Index*DeltaL; #declare Xlength=2*(Xstart+Index*DeltaL-InitCorner*cos(radians(45))); #declare Zlength=2*(Zstart+Index*DeltaL-InitCorner*cos(radians(45))); box{<0,0,0>,<-Width,0.01,-Zlength> translate <Xstart+Index*Pitch,0,Zlength/2>} box{<0,0,0>,<-Width,0.01,-Lengthcorner> rotate 45*y translate <Xstart+Index*Pitch,0,-Zlength/2>} box{<0,0,0>,<-Xlength,0.01,Width> translate <Xlength/2,0,-Zstart-Index*Pitch>} box{<0,0,0>,<-Width,0.01,-Lengthcorner> rotate 135*y translate <-Xlength/2,0,-Zstart-Index*Pitch>} box{<0,0,0>,<Width,0.01,Zlength+DeltaL> translate <-Xstart-Index*Pitch,0,-Zlength/2>} box{<0,0,0>,<-Width,0.01,-Lengthcorner> rotate 225*y translate <-Xstart-Index*Pitch,0,Zlength/2+DeltaL>} box{<0,0,0>,<Xlength+Pitch,0.01,-Width> translate <-Xlength/2,0,+Zstart+Index*Pitch+DeltaL>} box{<0,0,0>,<-Width,0.01,-Lengthcorner> rotate 315*y translate <Xlength/2+Pitch,0,+Zstart+Index*Pitch+DeltaL>} #declare Index = Index + 1; #end box{<0,0,0>,<-Width,0.01,-Zlength-0.5> translate <Xstart+Index*Pitch,0,Zlength/2>}//connections to the pads box{<0,0,0>,<Xstart-InitCorner*cos(radians(45))/2,0.01,-Width> translate <0,0,Zstart-InitCorner*cos(radians(45))/2>} box{<0,0,0>,<-Width,0.01,-InitCorner/2> rotate 315*y translate <Xstart-InitCorner*cos(radians(45))/2,0,Zstart-InitCorner*cos(radians(45))/2>} pigment { P_Copper4 } } cylinder{<0,0,0><0,0.015,0>,Width translate <Xstart+Index*Pitch-Width/2,0,-Zlength/2-0.5>} cylinder{<0,0,0><0,0.015,0>,Width translate <0,0,Zstart-InitCorner*cos(radians(45))/2-Width/2>} pigment { P_Copper4 } } //declaration of the pcb------------------------------ #declare PCB = difference { box { <-3,0,-3>,<3,0.2,3> } union { box {<-0.5,-10,-1.6>,<0.5,10,1.6>} box {<-1.9,-10,-1.6>,<-1.4,10,1.6>} box {<1.4,-10,-1.6>,<1.9,10,1.6>} box {<-2.0,-10,-0.3>,<-1.6,10,0.3>} box {<1.6,-10,-0.3>,<2.0,10,0.3>} } pigment{LimeGreen} finish{F_MetalB} } //declarations for the clip --------------------------- #declare halfclip = prism { linear_sweep bezier_spline 0, 1, 32, // the following points value come from another model, hence the fancy values <0,0>,<1.2,0>,<0,0>,<1.2,0>, <1.2,0>,<1.3,0>,<1.6,-0.2>,<1.7,-0.2>, <1.7,-0.2>,<1.8,-0.2>,<1.8,-0.2>,<1.8,1>, <1.8,1>,<1.9,1>,<1.8,1>,<1.9,1>, <1.9,1>,<1.9,-0.3>,<1.9,-0.3>,<1.7,-0.3>, <1.7,-0.3>,<1.6,-0.3>,<1.3,-0.1>,<1.2,-0.1>, <1.2,-0.1>,<0,-0.1>,<1.2,-0.1>,<0,-0.1>, <0,-0.1>,<0,0>,<0,-0.1>,<0,0> pigment {P_Chrome1} finish {F_MetalD} } #declare completeclip = union { object{halfclip scale 0.5*y} object{halfclip scale 0.5*y rotate 180*z translate 0.5*y} } // the final union------------------------------------------------- union { #if(Exploded) object {coil translate <0,1.9,1.5>} object {PCB translate <0,1.7,1.5>} object {completeclip scale <0.7/3.6,1,0.7/3.6> rotate <-90,0,-90> translate <-2.8,3.35,1.75>} object {completeclip scale <0.7/3.6,1,0.7/3.6> rotate <90,0,-90> translate <2.8,3.35,1.25>} object {Ecore rotate 180*x translate <0,3.7,3>} #else object {coil translate <0,0.4,1.5>} object {PCB translate <0,0.2,1.5>} object {completeclip scale <0.7/3.6,1,0.7/3.6> rotate <-90,0,-90> translate <-1.8,0.35,1.75>} object {completeclip scale <0.7/3.6,1,0.7/3.6> rotate <90,0,-90> translate <1.8,0.35,1.25>} object {Ecore rotate 180*x translate <0,0.7,3>} #end object {Icore translate <0,0,0>} #if(Exploded) rotate <0, -30, 0> #else rotate <0, -40, 0> #end finish { #if(RAD) ambient 0 diffuse 0.7 #else ambient 0.8 diffuse 0.5 #end phong 1 phong_size 60 } } light_source { <0, 14, -10> color White} light_source { <2, 4, -10> color White} #if(Exploded) camera {location <1,8,-15> look_at <-0.3,2.2,0> angle 26} #else camera {location <1,10,-15> look_at <-0.6,1,0> angle 17} #end
then compiled using the following command:
povray -IPlanar_core_assembly_exploded.png -W1280 -H960 -Q11 +A
Підписи
Об'єкти, показані на цьому файлі
зображує
25 червня 2006
Історія файлу
Клацніть на дату/час, щоб переглянути, як тоді виглядав файл.
Дата/час | Мініатюра | Розмір об'єкта | Користувач | Коментар | |
---|---|---|---|---|---|
поточний | 09:23, 24 січня 2007 | ![]() | 1280 × 960 (154 КБ) | Pngbot | optimized with optipng |
13:11, 25 червня 2006 | ![]() | 1280 × 960 (209 КБ) | CyrilB~commonswiki | {{Information |Description=Exploded view of an planar inductor constituted by a spiral track on a printed circuit board and a planar magnetic core |Source=Own work |Date=25/06/2006 |Author=Cyril BUTTAY |Permission=as licensed |other_versions= }} |
Використання файлу
Така сторінка використовує цей файл:
Глобальне використання файлу
Цей файл використовують такі інші вікі:
- Використання в als.wikipedia.org
- Використання в bg.wikipedia.org
- Використання в ca.wikipedia.org
- Використання в de.wikipedia.org
- Використання в en.wikipedia.org
- Використання в et.wikipedia.org
- Використання в fr.wikipedia.org
- Використання в hi.wikipedia.org
- Використання в hu.wikipedia.org
- Використання в it.wikipedia.org
- Використання в wo.wikipedia.org